Call Center:
+62 (21) 6613453
Why PT Benua Kencana Makmur
Why PT Benua Kencana Makmur
1. Analyze the size and scope of your manufacture, so we can determine and offer the best solution.
2. Analyzing all the problem or situation that exist and then focus on the right solutions for your company.
3. Formulating an idea or proposing a product, we keep an open minded solutions and idea.
FAQ : DRYING & DEHYMIDIFYING
Model Selection
Can SMD reduce room humidify and the Moisture Content of meterial inside the room?
It is Common to dehumidify the room by the air-condition system. SMD Mold Sweat Dehumidifiers can not meet the needs of large space. It is designed for the inhibition of moisture from condensing on the mould surface. You can choose the right machine according the capacity of Molding machine and the temperature of the chilled water. Refer to the Specifications on the Content.
FAQ: FEEDING AND CONVEYING
Model Selection
One customer wants to convey around 80 Kg/hr of crushed PE from one factory to another, the material must go up 10 mts and 11 mts horizontally, could you please suggest us the suitable hopper loaders for this application.
SAL-2HP-UG+SHR-12U can meet this application
FAQ: GRANULATING & RECYCLING
Model Selection
How to select appropriate granulators?
Firstly we should confirm if the max dimension of regrind materials is smaller than the diameter of feed-in port of cutting chamber. The machine is not available if it is larger. Granulators are also selected according to the thickness and hardness of materials besides acceptable dimensions, so as to reach desired throughput capacity and save energy. Lastly, screen mesh should be selected according to particle size of regrind materials and type of model.
FAQ: HEATING & COOLING
Model Selection
Chiller requirements: Flow rate 150L/min; Temp Range 10-25 degrees (indoor or outdoor unit); Productivity 30kg/Hour; Dryer requirements: Material PC; output capacity 30kg/hour.
SIC-12.5-P and SCD-160U/120H are suitable.
FAQ: DOSING MIXING
Please suggest one suitable mixing model to meet following mixing ratio: 80%~90%，10%~20%，5%~10%，1%~5%.
SGB-600-4-2R would be OK, which has two screw feeders for the two small components. please take note that the SGB can only process granules.